Модуль с 8 реле – RS485 Modbus RTU

Modbus RTU Realy

8-kanałowy moduł przekaźnikowy sterowany przez magistralę RS485, wykorzystujący protokół Modbus RTU

Przekaźnik Modbus RTU jest bardzo łatwy w użyciu. Ze względu na szybką komunikację, stabilność, niezawodność i bezpieczeństwo jest idealnym wyborem do przemysłowych urządzeń sterujących i / lub aplikacji o wysokich wymaganiach komunikacyjnych.

Dodatkowe informacje, przykłady oprogramowania, sposób sterowania itp

Wiki : www.waveshare.com/wiki/Modbus_RTU_Relay

• Configurable device address (1~255), multi devices can be cascaded on RS485 bus
• Features flash-on, flash-off function, by passing argument to the command, it is possible to turn on the relay for a while and then close it automatically
• Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal
• Onboard unibody ADI magnetical isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption
• Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
• Onboard Optocoupler isolation, prevent the relay from being interfered by high-voltage circuit
• Reverse-proof circuit, prevent the circuit from being damaged accidentally by incorrect connection
• High quality relay, contact rating: ≤10A 250VAC/30VDC
• Rail-mounted ABS plastic enclosure, easy to install, safe to use
• 3 LEDs for indicating the MCU status and signal transceiving status

• Power supply voltage: 5V
• Communication interface: RS485
• Baudrate: 4800, 9600, 19200, 38400, 57600, 115200, 128000, 256000
• Default communication format: 9600, N, 8, 1
• Relay channels: 8
• Contact form: 1NO 1NC
• Communication protocol: Standard Modbus RTU protocol
• RS485 address: 1~255
• RS485 terminal protection: 600W lightning-proof and surge-suppress, 15KV ESD protection (reserved 120R balancing resistor solder pads)
• LED indicators:

  STA: MCU indicator, keep flashing when the MCU normally working

  TXD: TX indicator, light up when sending data

  RXD: RX indicator, light up when receiving data

W zestawie:

1. Modbus RTU Relay x1
2. Power adapter US plug 5V/2A 5.5/2.1 x1
3. Power adapter EU head x1

Hardware Analysis

Enclosure Design

Rail-Mounted ABS Plastic Enclosure, Easy To Install, Safe To Use

RS485 Communication

Configurable Device Address (1~255), Multi Devices Can Be Cascaded On RS485 Bus

In Case Of Many Devices Are Cascaded, Or Communication Distance Is Quite Long, It Is Necessary To Use 485

Relay Connection

Contact Rating Of The Onboard Relay Up To 10A 250VAC/30VDC

Directly Controlling 220VAC Home Appliances, Or Devices Below 30VDC