zr-315 МГц Пульт дистанционного управления с 4 кнопками Портативный

Feature:1. It's a lightweight remote control, small enough to hold a key chain, so it's not bulky at all and easy to carry when you go out.

2. The data copy speed is faster, it is not easy to lose codes, and the distance is long.

3. This remote has a strong wireless signal that can pass through walls, floors and doors.

4. Its small size, low power consumption, flexible operation and easy installation.

5. 4-channel wireless remote control. Adjustable operating mode, on, off. Switch for a moment, switch and lock.

6. Wide range of applications. Suitable for cars, car sunroofs, garage doors, gates, alarm systems, heating systems, etc.

. 315 MHz Remote Control with 4 Buttons Portable

Specification:Article type: remote control

Material: ABS

Operating voltage: direct current 6 V

Operating Current: 14mA Mute Current: 0MA works

Frequency: 315MHz

Power transmission range: 10mw

Starting distance: about 100m/328ft (open environment)

Built-in battery: button battery

Built-in battery model: CR2032

Built-in battery capacity: 210 mAh

Application: copying and restoring wireless remote controls such as fences, garage doors, cars, motorcycles, etc.

Scope of application of the copying remote control: ordinary fixed codes (chip type 2260, 2262, 2264), learning codes (1527, 2240) remote control.

. 315 MHz Remote Control with 4 Buttons Portable

How to use:Description:

1. Codes (science)

Close the original remote and the copied remote as close as possible, first press the button on the original remote, then press the copied remote button immediately after the indicator light lights up for about 3 seconds. After 3 seconds, the LED flashes 3 times and then flashes quickly, indicating successful learning of the address codes of the original remote control button. The operation of other buttons is the same as learning.

2. Clear codes:

Press the unlock and lock button at the same time for 2 seconds, the LED will flash 3 times. At this point, press and hold the lock switch, then release the unlock switch. Press the unlock button 3 to 4 times in 5 seconds and the indicator will flash quickly. The codes are available.

Verify that your existing remote codes have been successfully cancelled: Once the delete operation is complete, you can press any button on the copy remote. If the indicator does not start flashing immediately, but begins to flash after 2 seconds, it means that the original codes of the copied remote control have been completely canceled. If the LED continues to flash quickly and instantly, the codes still exist and must be cancelled again.

3. Restore authorization codes:

If useful codes are accidentally removed, you can press the start and mute buttons marked on the remote control (under two buttons) at the same time. After about 3 seconds, the indicator light flashes 3 times and then flashes quickly, indicating that the recovery has been successful.

. 315 MHz Remote Control with 4 Buttons Portable

Package List:1 x Remote Control

. 315 MHz Remote Control with 4 Buttons Portable